FLOOR CARE
WALL CHARTS
pH Principals

TILE COMPOSITION
Identification
Non-Resilient Tile:
Clay, Concrete, Magnesite, Marble, Slate, Stone, Terrazzo, Travertine
Resilient Tile:
Asphalt, Cork, LinoleumRubber, Vinyl, Vinyl Composition, Wood

PRODUCT TECHNOLOGY
Floor Finishes
Floor Sealers
Sealer/ Finishes
Strippers
Maintainers
Cleaners
Systems

PROCEDURES
Floor Care Life Cycle
Dry Cleaning
Damp Mopping
Wet Mopping
Automatic Scrubbing
Stripping
Sealing and Finishing
Top Scrubbing
Spray Buffing
Burnishing
Restoring

REFERENCE MATERIAL
Trouble Shooting Guide
Glossary & Terminology
Helpful Hints


CARPET CARE
RESTROOM CARE
EARTH-GARD




NON-RESILIENT TILE:   CONCRETE FLOORS

Concrete is a mixture of cement, sand, crushed stone or gravel, added into a slurry with water.  It is poured and then troweled.  It sets as a solid mass due to a chemical reaction of the cement with water.  Like traditional Terrazzo most concrete is porous and will stain.  Therefore it must be sealed.

CAUTIONS

  • Concrete is harmed by the same things that harm Terrazzo, i.e. acids, abrasives and crystalline cleaners.
  • Prevent dusting.  Concrete has a natural tendency to dust as it ages.   Sealing will prevent this.
  • Neutralize alkalinity.  All concrete is alkaline in nature.  Before painting or sealing with oil-containing sealers, neutralize by any standard method.
  • Silicate hardeners.  Concrete treated with solutions of silicates have increased surface density, hardness and gloss.  It almost non-porous and cannot be sealed unless sanded or mechanically abraded to allow the seal to adhere to the surface.
























Cleaning Technologies Group,  One Fuller Way,  PO Box 1247,  Great Bend, KS 67530
Phone: 620-792-1711   Fax: 800-848-4901   Email: ctginfo@cpac.com
Technical Service: 800-810-4829       Customer Service: 800-848-4901
Copyright© 2007 CPAC, Inc.    Privacy Policy    CPAC, Inc.   (Nasdaq: "CPAK")